Unbranded Single-sided adhesive tape with applied solvent free, modified acrylate adhesive and diagonal inlay.
Single-sided adhesive tape with applied solvent free, modified acrylate adhesive and diagonal inlay. Pull-off liner made of silicon paper. Optimum solution for taping Ampatop® F black.
Damp proof for external use
Completely black and unprinted
With side flange
|Roll Dimensions:||length: 50 m|
|width: 60 mm|
|thickness: 0.33 mm|
|Carton contents:||10 rolls = 250 m1|
|Pallet details:||28 cartons|
|Storage time:||2 years|
|Storage conditions:||cool and dry|
|Working temperature range:||above -5 °C|
|Temp. withstand range:||-40 to +80 °C|
|Outdoor exposure time:||3 months (before installation of facade)|
If required, clean the surfaces to be bonded, or the substrate. Cut Ampacoll® UV to the desired length and position it in the center of the overlap. The tape must be rubbed firmly to ensure a durable bond.
When taping penetrations such as outlet pipes, etc. apply Ampacoll® UV to the penetration overlapped and in strips and rub down.
To ensure the adhesive tape functions properly, the use of battens is necessary in order to secure further work and avoid potential weather damage (e.g. wind suction or pressure). We recommend installing the cladding as soon as possible. The cladding must be mounted after no more than four months. Joints can be up to 3 cm wide. Choose individual elements of cladding that are at least twice as wide.
- Product Downloads